4.5 cu. ft. Ultra Large Capacity Front Load Washer - White

4.5 cu. ft. Ultra Large Capacity Front Load Washer - White

WM4000HWA

LG Electronics

4.5

Front load

Mentioned on the manufacturer product page

3

929

In stock

Discover the 4.5 cu. ft. Front Load Washer that features TurboWash™ 360° Technology and Built-In Intelligence. Shop WM4000HWA from LG USA.

TurboWash

OE — WATER OUTLET ERROR: WATER OUTLET ERROR — Drain hose is kinked, pinched, or clogged. Make sure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer. The end of the drain hose is more than 96 inches (2.4 m) above the bottom of the washer. Move the end of the drain hose so that it is lower than 96 inches (2.4 m).

IE — INLET ERROR: INLET ERROR — Water supply faucets are not fully open. Make sure that the water faucets are fully open. Water inlet hoses are kinked, pinched, or crushed. Make sure that the hoses are not kinked, pinched or crushed behind or under the washer. Be careful when moving the washer during cleaning or maintenance. Water inlet filters are clogged. Clean the inlet filters. See MAINTENANCE. Water supply pressure to faucet or house is too low. Check another faucet in the house to make sure that household water pressure is adequate and flow is not restricted. Disconnect the water inlet hoses from the washer and run a f

UE — UNBALANCE ERROR: UNBALANCE ERROR — The load is too small. Add additional items to allow the washer to balance the load. Heavy articles are mixed with lighter items. Always try to wash articles of somewhat similar weight to allow the washer to evenly distribute the weight of the load for spinning. The load is out of balance. Manually redistribute the load if articles have become tangled, preventing the automatic rebalancing from working properly.

dE,dE1,dEz,dE4 — DOOR OPEN ERROR: DOOR OPEN ERROR — The door is not secured. Close and secure the door. If the message keeps appearing, unplug the power cord and call for service.

tE — TEMPERATURE SENSOR ERROR: TEMPERATURE SENSOR ERROR — Control error. Unplug the washer and wait 60 minutes. Reconnect power and try again. If the error code is still displayed, call for service

FE — OVERFLOW ERROR: OVERFLOW ERROR — Water level is too high due to a faulty water valve. Close the water faucets, unplug the washer, and call for service.

PE — PRESSURE SENSOR ERROR: PRESSURE SENSOR ERROR — The water level sensor is not working correctly. Close the water faucets, unplug the washer, and call for service.

LE — MOTOR LOCKED ERROR: MOTOR LOCKED ERROR — A motor error has occurred. Allow the washer to stand for 30 minutes and then restart the cycle. If the error code is still displayed, call for service.

FF — FROZEN ERROR: FROZEN ERROR — Inlet hose, drain hose or drain pump is frozen. See Care in Cold Climates.

Connecting the Drain Hose

Cleaning the Drain Pump Filter

Owner manual PRODUCT OVERVIEW labels a Drain Pump Filter and Drain Pump Filter Cover on the front of the washer (with Drain Hose). Cleaning access is via the drain pump filter cover (see MAINTENANCE — Cleaning the Drain Pump Filter). Named parts: Drain Pump Filter, Drain Pump Filter Cover, Drain Hose

Owner manual PRODUCT OVERVIEW labels a Drain Pump Filter and Drain Pump Filter Cover on the front of the washer (with Drain Hose). Cleaning access is via the drain pump filter cover (see MAINTENANCE — Cleaning the Drain Pump Filter). Cleaning the Drain Pump Filter Drain hose height: 24–96 in (61–244 cm) above bottom; best ≤66 in (168 cm) OEM drain pump/filter part numbers were not found in this owner-manual procedure and are not invented. (Not published in the owner-manual procedure (not invented)) Source document: WM_VUS_MFL71964303_06_260123_00_OM_WEB_EN.pdf Manual family (MFL): MFL71964303

Cleaning the Water Inlet Filters

LG WM4000HWA Washer Shock Absorber - ACV72909503

LG WM4000HWA Washer Suspension Spring - MHY62964802